It is very important that emergency lighting is installed and maintained. Do you know how to install and maintain emergency lighting? Here Effort tells you about the importance of emergency lighting installation and maintenance and what to look for in emergency lighting installation and maintenance.

The importance of emergency lighting installation and maintenance

In shopping malls and schools, where there is a large flow of people, emergency lighting should be used in order to meet the standards, otherwise, in the event of an accident, it will not be possible to reduce some casualties through emergency lighting, so it is necessary to install emergency lighting in most crowded places. After installation, it is necessary to do a good job of routine maintenance, the purpose of doing so is to ensure normal use, otherwise after installation, routine maintenance is not in place, can not be used normally, it may be easy to cause a lot of trouble, it is recommended that in normal times should go to know whether the emergency lights can be used normally, you can go to check every day, if you feel that every day If you think it is too troublesome to check every day, you can also choose to check every three days for five days, not too long intervals, otherwise there is a possibility that the failure will occur again, and later not be able to understand clearly in time.

Emergency lighting installation and maintenance considerations

Engineering design is an important prerequisite for the installation and maintenance of emergency lighting, therefore, the following points should be noted when completing the relevant work: 

1. In the engineering design link, attention should be paid to the work of fire emergency lighting, according to the layer with a special feeder circuit circuit power supply.

2. the use of diesel generators as an emergency power source to ensure a continuous supply.

3. when installing lighting equipment, consider that people will creep or bend forward in a fire, so it should be installed low to provide evacuation emergency lighting close to the ground.

4. when using the emergency light, it should be ensured that it is in a discharged state and should be charged for 20 h before use

5. To ensure the performance of the emergency light, it should be checked regularly, focusing on circuit conversion and the emergency function of the battery, so that any problems with the emergency light can be identified in time.