Timing Belts factory Features 鈼?Strong transmission capacity: can meet the increasing transmission requirements of the machine. 鈼?Better adaptability: meet the requirements of machine working in the severe environment. 鈼?Better driving precision: improve the performance of modern machines. 鈼?Better wear resistance: improve the adaptability to the driving pulleys. 鈼?Longer service life and less noise. Specification HTD&STD SYNCHRONOUS BELT SectionPitch (mm)Tooth Height (mm)Belt Thickness (mm)Model Range MinMax 2M2.000.751.36488506 3M3.001.172.401113000 5M5.002.063.801753770 8M8.003.486.001124400 14M14.006.0210.008264578 20M208.4013.2022004200 S2M2.000.761.361203000 S3M3.001.142.201023210 S5M5.001.913.401602765 S8M8.003.055.303764400 S14M14.005.3010.209663850 Applications Paper and textile machinery, CNC machines, printers, scanners, office machines, Robotic machines, electric hand tools, currency counting machines, food processing machines, etc. Production Details The PIONEER synchronous belt is superior timing belts for various types of synchronous drive, with performing on a wide range of load capacities and speed ratios. The belt is non-slip engagement with constant angular velocity, relatively maintenance-free, and economical. Timing Belt Failure Analysis Shock Load Appearance: Snapped Cause 鈼?Shock loading in belt drives occurs when higher than normal intermittent or cyclic torque loads are generated by the driven equipment. These shock loads result in higher than normal belt stresses and can act as a catalyst for belt failure. 鈼?Severe shock loads can result in belt tensile breaks with a ragged and uneven appearance as illustrated in Figure 4. The particular belt teeth engaged in the sprocket at the instant of the shock load may also develop root cracks and/or exhibit tooth shear. 鈼?Figure 5 illustrates how root cracks caused by shock loading can propagate through the teeth. Cracks forming at the tooth roots sometimes move towards the tooth tips. Teeth containing multiple cracks may then shear, leaving only a portion of the tooth behind. Solutions If the drive shock loads cannot be eliminated, the belt tensile strength may need to be increased or the synchronous belt drive replaced with a more forgiving V-belt drive system capable of intermittent slip.Timing Belts factory website:http://www.pioneerdrivebelt.com/timing-belts/